Worx Nitro WG330E Manual Original página 16

Depress Safety Lock Trigger,0.5seconds
later, the LED Light Indicator turns on
and the product is ready to work after
a beep.
WARNING: Wear protective gloves
and eye protection while working
with the pruner
If no action in 10 seconds, then the
LED Light Indicator will go out and the
product will turn off after hearing a beep.
If you release the Safety Lock Trigger
directly, then LED Light Indicator and the
product will turn off.
EN
UNLOCKING THE PRODUCT
16
Once activated, hold down Safety
Trigger, while simultaneously depressing
the ON/OFF Trigger to engage the
blades.
A.If the blades are in the MAX cut
opening, the product will beep once and
blades keep the MAX cut opening;
B.If the blades are not in the MAX cut
opening, the product will beep once and
blades will reach the MAX cut opening.
PROGRESSIVE CUTTING
The blades will naturally return to the
open position when the ON/OFF Trigger
is released, while the blades will get
SeeFig. D closed once push the ON/OFF Trigger.
The degree of blade's closure will be
controlled by the degree of ON/OFF
Trigger's closure.
NOTE: When the scissors can't cut cause
the material is too hard or too stiff, the
See Fig. E
product will beep once, then the scissors
return to the open state and stop working.
EXCHANGE THE CUTTING SIZE
See Fig.F
See Fig.
G.H
See Fig. I