Publicidad
Laser Distance Meter
5.Measuring
5-1.Single Distance Measurement
• Press ON/MEAS Button to trigger the distance measurement.
• The measured value is displayed immediately.
5-2.Continuous Measurement (Tracking) & Max and
Min Measurement
• Press ON/MEAS Button longer to trigger continuous
measurement function.
• You can press Clear/OFF Button to stop the continuous
measurement and longer press will switch off the device.
• The continuous measurement function (tracking) is used for
the transferring of measurements, e.g., from construction
plans.
• In continuous measurement mode, the measuring tool can
be moved to the target, whereby the measured value is
updated approx, every 0.5 seconds in the third line.
• The corresponding minimum and maximum values are
displayed dynamically in the first and second line.
• As an example, the user can move from a wall to the required
distance, while the actual distance can be read continuously.
• The function is terminated automatically after continuous
500 times measurement.
14
MIN
Publicidad
