Technical Specifications; Cleaning And Care; Declaration Of Conformity - Elektrotechnik Schabus GX-A1 Instrucciones De Uso

6. TECHNICAL SPECIFICATIONS

Operating voltage:
Power consumption:
Sensor voltage:
Relay contact:
Acoustic pressure sounder:
Operating temperature:
Protection type:
Dimensions (HxWxD):
7. GENERAL
Elektrotechnik Schabus GmbH & Co. KG is not liable for damages and/or losses of any kind
such as individual damages or consequential damages brought about by the gas detector not
issuing an alarm despite the presence of an elevated gas concentration.
To ensure that the sensor is always in a proper functioning state, you should replace it after
5 years for safety's sake.

7.1 Cleaning and care

Avoid the effects of moisture (spray or rain water), dust as well as direct insolation on the
device. Clean the device exclusively with a dry linen cloth; in case of heavy dirt accumulation,
it may be slightly moistened. Do not use any detergents containing solvents.

7.2 Declaration of conformity

The CE mark on the device confirms that it conforms to relevant EU directives. The declaration
of conformity is available for viewing at the address below.
Elektrotechnik Schabus GmbH & Co. KG
Baierbacher Straße 150
D-83071 Stephanskirchen
All rights, technical changes, errors and misprints are reserved.
210 - 250 V AC / 50-60 Hz
4 W
5 V
5 A (potential-free two-way contact)
90 dB @10 cm
-15°C / +40°C
IP 20
80x160x55 mm
13