Before Starting Installation; Parts Included With Product; Materials Needed - Midea MGS30S2AST Instrucciones De Instalación

BEFORE STARTING INSTALLATION

Parts Included with Product

Packed with the product are the following oven components and
accessories. When product is first unpacked, verify that all these
components are present. If anything is missing, check the
packaging materials carefully for missing items. If items cannot
be located, contact Midea customer service at
or visit
Surface Burners
and Caps (5)
Oven Probe

Materials Needed:

The gas utility connection and house structure at each home may be
different, so the specific parts required for connection to the house
are not included with the product. The parts identified below are or
may be required to complete the installation. For gas supply
connections, always use new supply line and adapters - never use an
old part for new range connections.
Gas Line
Shut-Off Valve
New Flare Union
Adapter
1/2" NPT x 1/2" ID
12
for assistance.
Surface Burner
Grates (3)
Wire Rack
New Flexible
Gas Supply Line
3/4" or 1/2"
NPT x 1/2" ID
Liquid Leak
Detector or Soapy
Water Solution
(for concrete floors only)
Anti-Tip
Bracket Kit
Extension Rack
(some models)
Gas-Approved
Teflon Tape or
Joint Compound
5/16" OD Sleeve
Anchor
(with 1/4" bolt) - 2 pcs
Griddle
(some models)
en
oven
Power supply:
Circuit:
Frequency:
Capacity:
(Pictures are for reference only and may not
Before using this product,
accurately represent all models covered by this manual.)
please read this manual carefully
and keep it for future reference.
The design and specifications
are subject to change without
prior notice for product
improvement. Consult with your
dealer or manufacturer for
details. MODEL NUMBERS
version A - 4 - 2020 www.midea.co
Owner's
Manual
New Flare Union
Adapter 3/4" or
1/2" NPT x 1/2" ID
Optional Rear
Trim Kit