INSTALLATION PROCEDURE
Packaging Removal:
WARNING
TO PREVENT DAMAGE TO APPLIANCE
• Failure to remove packaging materials could result in damage to the
appliance.
Remove all tape and packaging materials. Check for film on stainless
steel parts, padding/spacers on and around door and face of oven,
cardboard and plastic on and around racks, inside storage drawer, etc.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or
abrasive cleaners to remove tape or glue. These products can damage
the surface of your range.
Inventory all loose parts against the "Parts Supplied" list.
Check for shipping damage and/or missing parts. Any damage and/or
missing parts should be reported to your local retailer.
To reduce the weight of the range while being moved, adjusted, and
installed, leave the cooktop grates, cooktop burners, oven racks, and
any other accessories to the side until they are ready to be installed
later in these instructions.
21