To adjust temperature setting on Control Input Knob models (models
without a numeric keypad), rotate the control input knob.
Directions:
• Ensure door is closed, all packaging is removed, and oven is empty
except for oven rack(s).
• Press the BAKE button on the oven control - the control will default to
350F.
• Adjust temperature setting to 170 F.
• Press the START/ENTER button on the oven control.
• Listen for "clicking" from spark igniter and "whoosh" of ignition.
o If oven does not ignite immediately, spark igniter will only activate for
a few seconds. If this happens, the oven control will turn off the gas
flow to the burner, wait 10-15 seconds, and attempt reignition.
It will make a total of 3 attempts before generating an error.
The entire process should take less than 1 minute.
o It is normal for the oven control to attempt igniting 2 or 3 times
immediately after the unit is first installed due to residual air in the gas
lines inside the range.
If the oven ignites, but not on the first attempt, cancel the bake mode
and restart, confirming that oven ignites on the first attempt.
o Once all air has been purged from the gas lines, the oven should ignite
immediately on first attempt.
If oven continues to require multiple attempts to ignite, contact a
qualified service provider for investigation and repairs.
• Allow BAKE mode until unit has preheated to 170F.
Confirm that display shows temperature increasing and that preheat
signals when temperature is reached.
• Press the CLEAR/OFF button to stop the bake mode.
• Press the BROIL button on the oven control.
• Press the START/ENTER button on the oven control.
• Listen for "clicking" from spark igniter and "whoosh" of ignition.
o If broil burner does not ignite immediately, see comments on bake
mode above regarding ignition sequence.
o If broil burner flames do not carry around entire burner, this may also
be an indication that air is present in the gas lines.
Allowing burners to run for 1-2 minutes should purge the lines of any
remaining air.
• Observe broil flame quality through oven door window.
• Press the CLEAR/OFF button to stop the broil mode.
• If anything does not operate correctly, or if broil flames appear abnormal,
have the operation investigated by qualified service provider
Control Settings (optional):
See detailed instructions in the User's Manual for connecting the oven
control to WiFi, setting the clock, or adjusting other settings.
°
35