PERIOD MAINTENANCE AND CHECKS:
EN
CHARGER
Ensure that the charger cord is not damaged and that the wires are not
exposed to avoid short circuits. The input and output sockets must not be
damaged or deformed.
When using the battery charger, it is important to follow the instructions on the label.
WARNING: Only use the charger supplied with the product.
BRAKES
Before each use, check that the brakes are in perfect working order. Check the
brakes regularly to prevent accidents due to brake malfunction.
The brake lever (depending on the model) must not come into contact with the
handlebars and the cables must not be bent at a sharp angle so that the cables
slide with minimum friction. Damaged, frayed or rusty cables must be replaced
immediately.
CAUTION: The surface of the brakes can become extremely hot during and after
operation. You may suffer burns if you come into contact with these hot surfaces.
CAUTION: In rainy or wet weather, braking distances are extended.
CABLES
Make sure that the cable ports are not loose or broken.
SCREWS
Check the screws in the main components and tighten them regularly. Riding the
device causes vibrations that loosen the screws over time.
4.3. CLEANING YOUR DEVICE
Follow these instructions and precautions for cleaning the device:
• Unplug all the device's charging cables before cleaning it.
• Never immerse in water.
• Do not use a high-pressure cleaner, water jet or any other appliance or washing
method that would allow water to seep into the device.
• Clean the device with a sightly damp sponge or a soft cloth, avoiding the connectors
and buttons and making sure water is not allowed to seep into the plugs, circuits or
inside the product.
• Do not use water or liquid cleaners directly on the device to clean it.
• Do not use abrasive products or solvents as these could damage the paint on your
device.
• Be careful when cleaning and wiping plastic parts.
• Do not use abrasive products or solvents to clean metal or plastic parts.
19