Manual Override - Good Earth Lighting SE1292-BP2-02LF0-G Manual De Instrucciones

4
To Switch To Manual Mode
1
ON
OFF
Default
(Starting Position)
To return to "AUTO" mode: Turn the switch to the OFF position for 10 seconds and then ON.
IMPORTANT
MOTION SENSOR TO RETURN TO CONTROLLING THE FIXTURE THE NEXT DAY.
IMPORTANT
DAY. HOWEVER, THIS PROCESS MUST BE RESET EACH DAY AFTER DUSK TO DAWN FEATURE CYCLES THE PREVIOUS
DAY'S MANUAL OVERRIDE CYCLE OFF.
10
Customize Settings (cont'd.)
COLOR TEMPERATURE SETTINGS
To change the white color of the light, rotate the "Color
Temperature" dial to the preferred setting:
3000K Warm white
4000K Bright white
5000K Daylight white
Rotate the COLOR TEMPERATURE control knob to either 3000K,
4000K, or 5000K to set the light color.

Manual Override

ON
OFF
2-4 Seconds
Switch the power OFF, ON, OFF, and then ON within 2-4 seconds.
THE SECURITY LIGHT WILL REMAIN ON UNTIL THE INTERNAL DUSK-TO-DAWN SENSOR
DETECTS THE NEXT DUSK-DAWN CYCLE. ONCE THE LIGHT IS DETECTED, IT WILL ALLOW THE
MANUAL OVERRIDE ALLOWS THE LIGHT TO TURN ON AT ANY TIME, BY OVERRIDING ALL
SENSOR CONTROLS. IT ENABLES THE LIGHT TO ACTIVATE REGARDLESS OF THE TIME OF
ON
ON
OFF
OFF
ON
OFF