Remote Control - AVer MD330U Serie Manual Del Usuario

Remote Control

The remote control requires two "AAA" batteries. Make sure batteries are installed properly before use.
1
HOME SNAP
REC
2
3
4
5
MIC
PRIVACY SPEAKER
6
X
7
Model: LY033
Name
8
1. Power
9
2. Home
10
11
3. Number
Buttons
12
13
14
4. Preset
15
16
17
5. Zoom +/-
6. MIC
7. Camera
Select
8. Remote
Control
LED
9. Menu
10. Snap
11. Rec
12. Reset
13. Direction
Buttons
14. Volume +/-
Function
Short press to turn on/off the Standby mode.
Move the camera to the Home position.
 Press buttons 0~9 to move the camera to the
pre-configure preset positions.
 Use the buttons to set up preset positions 0~9.
Use the Preset, Number and Direction Buttons to
set up preset positions.
a. Use the Direction Buttons to navigate a
position. Optionally use the "Zoom +" or "Zoom
-" buttons to zoom in/out the image.
b. Press and hold Preset, then press the Number
Buttons (0~9) to save this preset position.
Press to zoom in or zoom out the images.
Press to mute the microphone. Press again to
unmute.
CAM1 to CAM4 buttons. Select a camera to
operate. To set up camera ID, refer to Camera
Selector in the <OSD Menu Tree> chapter.
When pressing the buttons on the remote control,
the LED will light red.
Press to enter or exit the OSD menu.
Press to take a snapshot image. The images will
be stored in the microSD card.
Press to start recording to the micro SD card.
Press the button again to stop recording.
Use the Reset and Number Buttons to cancel a
pre-configured preset position. Press and hold
Reset, then press the Number Buttons (0~9).
Use the Direction Buttons to navigate the live view.
Press to adjust the volume up or down.
10