Set Up The Camera; Osd Menu; Ip Address Setup; Static Ip - AVer MD330U Serie Manual Del Usuario

Set Up the Camera

You can configure the camera settings using the OSD menu or the Web interface of the camera.

OSD Menu

To access the OSD menu, connect the camera to a monitor or TV using the HDMI cable, and then you
can use the supplied Remote Control to operate the OSD Menu.
Press the Menu button on the remote control to bring-up the OSD menu and use ▲ , ▼ , ,  to
select among pages or options, and press

IP Address Setup

Static IP

1. Press the Menu button on the remote control to bring-up the OSD menu.
2. Go to Network > Static IP.
[Note] Turn the DHCP off before setting up static IP (Network > DHCP > OFF).
3. Select the IP Address, Gateway, Netmask, and DNS to configure. Press
Number Buttons to enter the value.
to confirm settings.
12
and use the