Publicidad
Idiomas disponibles
Idiomas disponibles
2. SAFETY INSTRUCTIONS
while operating the machine.
•Beware of falling branches or those rebound after hitting the ground
, remove these branches in sections and opreate in the dangerous
positions.
•Keep a firm footing and balance during operation,including the need
to use the harness provided.
Never stand directly under the limb while you are sawing. Objects may
fall different than expected. Always position yourself out of the path of
falling limbs.
WARNING! Never climb into a tree to prune! Do not stand on
ladders, platforms, logs, or in any position which may cause you to
lose your balance or control of the product! When pruning trees, it is
important not to make the flush cut next to main limb or trunk until
you have cut off the limb further out to reduce the weight! This prevents
stripping the bark from the main member!
WARNING! This product has not been designed to provide
protection from electric shock in the event of contact with overhead
electric lines! Therefore do not use product near cable, electric power or
telephone lines. Keep a minimum distance of 10 m to all electric lines.
Remove the branches lying on the floor regularly to avoid stumbling
hazards. Check the oil level regularly and fill up if necessary. Switch
the power off and disconnect from power source when leaving the
product.
WARNING!Keep firm footing and balance during operation.
Always attach the product to the harness. Do not carry it only with your
hands!
EN
270
Publicidad
