Cleaning And Maintenance; Cleaning; Cleaning The Base Unit - Thermomix TM6 Manual De Instrucciones

Thermomix®
7

CLEANING AND MAINTENANCE

NOTE
Corrosion inside the appliance.
Ensure that the mixing bowl and especially the contact
pins underneath are thoroughly dried after cleaning. If
you use the mixing bowl when it is still wet, rust could
form inside the base unit.
• Allow the mixing bowl to dry fully before inserting it into the
base unit.
7.1

CLEANING

Note: All components (except for the base unit) are dishwasher-safe. Place plastic
parts, in particular the mixing bowl lid, into the top rack of the dishwasher in
order to avoid deformation resulting from exposure to higher temperatures and
pressure from items above.
Some of the plastic parts may become slightly discoloured but this does not
affect your health or how the parts function.
• Thoroughly clean all parts of
Thermomix® TM6 after every use.
Further details on cleaning options and cleaning programmes can be found in
the operating instructions on your Thermomix® TM6 under Main Menu >
Help > Instruction Manual.
7.2

CLEANING THE BASE UNIT

HAZARD
Risk of electric shock if water enters
appliance.
If water gets into the electrical components, you could
get an electric shock.
• Do not immerse the base unit in water or other liquids.
• Do not hold the base unit under running water.
• Do not pour water over the base unit.
• Disconnect the appliance from the mains power supply
before cleaning the base unit.
• Clean the base unit with a dry or damp cloth only.
• No water or dirt should enter the base unit.
• Do not use Thermomix® TM6 outdoors.
• If water has managed to get into the appliance, contact
your Vorwerk repair service.
1. Disconnect the appliance from the mains power supply before cleaning the
base unit.
2. Wipe off the base unit with a damp cloth and a gentle cleaning agent.
21
en