Dunsch DU10040-38C3 Instrucciones Originales página 36

TROUBLESHOOTING
Before performing any maintenance or cleaning work, always pull out the
battery and wait until the cutter has come to a standstill.
Problem
The motor does not
start.
The motor stops.
The grass remains on
the lawn.
The grass is not being
cut.
Abnormal noise.
Motor power drops
DISPOSAL
Do not dispose of power tools into household waste! According the
European Guideline 2012/19/EC for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that
are no longer usable must be collected separately and disposed of in
an environmentally correct manner.
GB
Possible cause
No battery
The battery is
properly inserted
battery holder.
The safety key is not
inserted correct position.
Overload protection has
switched off.
The grass box is full.
The blade is dull.
Screws or nuts have come
loose.
The blade is dull.
The cutting height
The block of discharge
channel/housing
The battery
discharged
34
Remedy
Put the battery into the
battery.
not Firmly insert the battery
into pack into the battery
holder.
Set the key position
according to the battery
number (1#or 2#)
Wait until the overload
protection re-establishes
the power supply.
Empty the grass box.
Replace the blade.
Check screws and nuts
for tightness.
Replace the blade.
Correct the
height
Clean
channel/housing
almost Charge the battery.
cutting
discharge