Publicidad
Idiomas disponibles
Idiomas disponibles
4.
Take the paper filter out of the dust box while
pulling the outer bottom edge of the cardboard opening
free from the lower hooking tab.
2
1
Fig.25
► 1. Paper filter 2. Cardboard opening 3. Upper hook-
ing tab 4. Lower hooking tab 5. Dust box
5.
Replace a paper filter by engaging the bottom
edge of the cardboard opening in the lower hooking
tab and push the top edge inwards until it clips into the
upper hooking tab.
2
1
Fig.26
► 1. Paper filter 2. Cardboard opening 3. Upper hook-
ing tab 4. Lower hooking tab 5. Dust box
6.
and holding the locking latches on both sides of the dust
box.
3
4
5
► 1. Dust nozzle 2. Dust box 3. Locking latch
Optional accessory
When you wish to perform clean sanding operation,
connect a Makita vacuum cleaner to your tool. Use
either an optional hose 28 mm or a combination of
the front cuff 22 and hose provided with the cleaner to
establish a connection.
3
4
5
► 1. Dust spout 2. Front cuff 3. Hose 4. Vacuum
12 ENGLISH
Snap the dust nozzle into place while pressing
3
1
Fig.27
Connecting with vacuum cleaner
1
2
Fig.28
cleaner
2
3
3
4
Publicidad
