ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Pad size
Abrasive paper
Orbits per minute
Overall length (with BL1860B)
Rated voltage
Net weight
*
The standard pad differs from country to country.
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications and battery cartridge may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Square pad
Triangular pad
Rectangular pad
For square pad (Hook and loop)
For square pad (Clamp)
For triangular pad
For rectangular pad
High
Low
112 mm x 102 mm (4-3/8" x 4")
112 mm x 190 mm (4-3/8" x 7-1/2")
112 mm x 168.5 mm (4-3/8" x 6-5/8")
114 mm x 102 mm (4-1/2" x 4")
114 mm x 140 mm (4-1/2" x 5-1/2")
Rectangular paper: 114 mm x 102 mm (4-1/2" x 4")
Triangular paper: 96 mm (3-3/4")
112 mm x 168.5 mm, 112 mm x 66 mm (4-3/8" x 6-5/8", 4-3/8" x 2-5/8")
1.4 - 1.7 kg (3.1 - 3.8 lbs)
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while
3.
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
Power tool plugs must match the outlet. Never
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
2 ENGLISH
XOB02
14,000 /min
11,000 /min
171 mm (6-3/4")
D.C. 18 V