Restoring Default Settings; Input Routing; Output Routing; Direct Out Routing - Tascam Sonicview 16 Manual Del Usuario

Restoring default settings

To restore all settings, including signal processing and routing,
to their default values, use the
the Menu Screen to select "P001 Initial Data", and tap the RECALL
button.

Input Routing

To check and change input channel routing settings, tap the
Input area at the top of the Home Screen for a Channel 1–40 or
ST IN 1-2 module (a area in "Setting various parameters on the
Home Screen" on page 13) to show the selection frame. Then,
tap the selection frame again to open the MODULE (INPUT)
Screen.

Output Routing

To check and change output connector routing settings, tap
the Output Area at the top of the Home Screen for a MIX 1–22
module (a area in "Setting various parameters on the Home
Screen" on page 13) to open the MODULE (OUTPUT) Screen.
To check and change MAIN L/R output connector routing
settings, press the MASTER section SEL key (y) to open the
MAIN L/R master MODULE Screen. Then, tap the OUTPUT screen
selection button at the top of the screen to open the MODULE
(OUTPUT) screen.

Direct Out Routing

To check and change Direct Out routing settings, tap a channel
1–40 NAME area on the Home Screen (e area in "Setting various
parameters on the Home Screen" on page 13) to open the
MODULE (OVERVIEW) Screen. Then, tap the OUTPUT button
above the DIRECT OUT TRIM volume area to open the DIRECT
and buttons at the top of
OUT PORT SELECT screen.

Functions

Layers

Channel sets and custom layers can be assigned and arranged
freely in seven layers. Different modules can be opened easily
using the LAYER KEYS.
Change settings for the LAYER KEYS (p) on the Layer Key Setup
screen. Open this using Menu Screen > Front Panel Setup menu
> Layer / Master Fader Setup item.
Default settings for LAYER KEYS 1–7
Sonicview 16 settings
Key Assigned function
LAYER KEYS 1
LAYER KEYS 2
LAYER KEYS 3 CH 33-40 / ST IN / FX RTN
LAYER KEYS 4
LAYER KEYS 5
LAYER KEYS 6
LAYER KEYS 7
Sonicview 24 settings
Key Assigned function
LAYER KEYS 1
LAYER KEYS 2 CH 25-40 / ST IN / FX RTN
LAYER KEYS 3
LAYER KEYS 4
LAYER KEYS 5
LAYER KEYS 6
LAYER KEYS 7
TASCAM Sonicview 16/Sonicview 24
CH 1-16
CH 17-32
MIX 1-16
MIX 17-22 / MAIN L/R
DCA
CUSTOM 2
CH 1-24
MIX 1-22 / MAIN L/R
DCA
CUSTOM 1
CUSTOM 2
CUSTOM 3
15