· Add engine oil to the upper level.
Recommended engine oil: SAE SJ 15W-40
Recommended engine oil grade: API Service SE type or higher Engine oil quantity: 1kW: 0.31L / 2kW: 0,35L
· Wipe the cover clean, and wipe up any spilled oil.
NOTICE
Be sure no foreign material enters the crankcase.
· Install the oil filler cap.
· Install the cover and tighten the screws.
AIR FIlTER
· Remove the screws 1, and then remove the
cover 2.
· Remove the screw 3 and then remove the air
filter case cover 4.
· Remove the foam element 5.
· Wash the foam element in solvent and dry it.
· Oil the foam element and squeeze out excess
oil. The foam element should be wet but not
dripping.
I
33