Product Usage - Edenwood FIRE LIGHT Instrucciones De Uso

B

Product usage

Before using the product
IMPORTANT!
• This speaker contains a non-replaceable battery.
• Before plugging in and switching on the speaker, make sure that all the controls
are turned off or set to the minimum level.
• If the speaker is not working properly, this may be because the battery is too
low and needs to be recharged.
Charging the speaker
1. Plug the AC adapter plug into the mains power socket.
2. Insert the other end of the AC adapter cable into the 10 V DC socket on the top of the speaker.
• The battery indicator light turns red when the speaker is charging and goes off when the
battery is fully charged.
• Before first use, fully charge the battery and for at least 6 hours. It takes approximately
6 hours to fully charge the battery, and a full battery provides around 2 hours of playback
at full volume.
• The battery icon
you when the battery is low. When the battery is low, the volume drops to 70%.
NOTE: Please charge the battery at least once a month, even if you are not using
the unit, to ensure its longevity.
Connections
Connect your device to the speaker using the cables and sockets/slots detailed below:
Device
Microphone/Guitar
Phone, iPad or
tablet
CD/DVD player
MP3 player
Record player
TV
is displayed to indicate the battery level. A battery low sound will alert
Connection
Use a microphone/guitar cable with a
6.35 mm plug (not provided).
Use an AUX IN cable with a 3.5 mm plug
(not provided). The other end of the
cable must be connected to your audio
device.
25
Speaker socket/slot
EN
MIC / GUITAR
AUX IN