Edenwood FIRE LIGHT Instrucciones De Uso página 30

B
Product usage
NOTE:
• The speaker can be used while it is charging but if the battery is too low, the
speaker performance might be poor. Lowering the volume may help improve
the sound.
• To ensure excellent sound quality, we recommend disconnecting the charging
cable from the speaker as soon as it has finished charging.
Music playback
1. Turn the – MASTER VOL + knob clockwise to turn on the speaker. When the speaker is
turned on, an ON prompt will sound, the speaker indicators will light up and the word HI
will be displayed on the screen.
NOTE: If the unit is not used within 15 minutes, it will turn off. Switch the – MASTER
VOL + button off then back on again to switch on the speaker again.
2. Connect your audio source as described in the Connections section.
3. To choose one of the following modes: BT, USB, TF, FM RADIO or AUX, repeatedly press
the button. To play the contents of a USB stick or TF/Micro SD card, simply insert the
stick/card in the unit's corresponding port; the unit will automatically start playing any
saved tracks or files. The screen will alternately display the track/file number and the
playing time.
NOTE:
• Make sure the volumes on both the speaker and the connected external
device are turned on.
• If you stop playback and/or unplug an audio device and then restart playback or
plug the device in again, playback will resume from where it was last stopped.
4. To control the audio playback, you can either use your external device's controls (if available)
or the following buttons on the speaker itself:
Button
– MASTER VOL +
Mode
All modes
BT/USB/TF
AUX only
28
Action
Turn the knob clockwise to increase
the volume and anticlockwise to
decrease the volume.
Press to play or pause (PAUS) the
track or file.
Press to play or mute the track or file.
EN