(h)
CONNECT Home Connect™
This function allows the user to connect the hood with a mobile device.
(i)
RH LAMP
Right heat lamp (PHxxGWS only)
Independently controls the right infrared heating lamp, turning the light on or off.
Control tone
To turn the control tone off or on, hold the FILTER and LIGHTS button for 3 seconds. The control tone may also be
turned off or on through the settings section of the Home Connect app.
Operating the hood
For better results
•
The blower should be turned on for about 5 minutes
before cooking in order to establish air currents
upward through the hood. Thus when heat, smoke,
moisture, grease and cooking odors are produced,
they will be carried outside instead of drifting into
other rooms.
•
Use the lower speeds for normal use and the higher
speeds for strong odors or fumes.
•
Drafts across the range or cooktop will reduce the
effectiveness of the hood. Such drafts should be
prevented when possible.
•
The best job of ventilation in the kitchen is done
where the only air currents are those created by the
blower itself.
•
Regular use of the fan system while cooking helps
keep the kitchen comfortable and less humid.
•
Use a rear burner when browning or pan frying meat.
•
For optimal performance, the width of the hood
should equal that of the cooktop or rangetop or
exceed it by 3 inches on either side. Install these
hoods only with Thermador blowers.
Home Connect™
With Home Connect™, the appliance is Wi-Fi capable and
can be remotely controlled using a mobile device (e.g.
tablet or smartphone). The Home Connect app offers
additional functions which are a perfect complement to
the networked appliance.
Home Connect does not work over Wi-Fi networks that
require browser registration, i.e. a user name and
password entered via a web browser.
You should have a stable wireless network with good
reception and access to the internet.
If the appliance is not connected to the WLAN network
(home network), it functions in the same way as a typical
appliance with no network connection and can be
operated as usual.
NOTE: Please ensure that you follow the safety
instructions given at the beginning of this instruction
manual and that these are also observed when operating
the appliance via the Home Connect app and when away
from home. Please also follow the instructions in the
Home Connect app.
NOTE: Operation on the appliance itself always takes
priority, and during this time it is not possible to operate
the appliance using the Home Connect app.
Setup
To implement settings via Home Connect™, you must
have installed the Home Connect app on a mobile device
(e.g. tablet or smartphone). Please observe the supplied
Home Connect documents that came with your appliance
with regard to this feature.
Follow the steps specified by the app to implement the
settings.
What do you need to connect your appliance to Home
Connect™?
1. Your appliance must be installed properly.
2. A smartphone or tablet equipped with the latest
version of iOS or Android operating system.
3. Your home appliance within the Wi-Fi signal of your
home network.
4. The name of your Wi-Fi network (SSID) and its
password (key).
IMPORTANT INFORMATION ABOUT DATA SECURITY:
The transfer of data is always encrypted. Home Connect
meets the highest security standards, which are
continuously reviewed. For further information visit
www.home-connect.com.
Information:
We are constantly working to improve the Home
Connect app, which may lead to differences in the
setup steps. Please rely on the instructions in the
latest version of the Home Connect app to guide you
through the setup process.
STEP 1: Download the Home Connect app and create a
user account
1. Open the App Store (Apple
Play™ store (Android™ devices) on your smartphone
or tablet.
2. Search for the HOME CONNECT app in the store's
search and install it.
®
devices) or Google
8