Descargar Imprimir esta página

Blackstar Amplification AMPED1 Manual Del Propietário página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 71
Warning!
Important safety information!
READ
THE
FOLLOWING
INFORMATION
CAREFULLY.
SAVE
ALL
INSTRUCTIONS FOR FUTURE REFERENCE!
Follow all warnings and instructions marked on the product!
Danger! High internal operating voltages.
Do not open the equipment case. There are no user serviceable parts in this
equipment. Refer all servicing to qualified service personnel.
Clean only with a dry cloth.
Condensation can form on the inside of an amplifier if it is moved from a cold
environment to a warmer location. Before switching the unit on, it is recommended
that the unit be allowed to reach room temperature.
Unauthorised modification of this equipment is expressly forbidden by Blackstar
Amplification Ltd.
Never push objects of any kind into ventilation slots on the equipment casing.
Do not expose this apparatus to rain, liquids or moisture of any type.
Avoid placing vessels filled with liquid on top of the amplifier.
Do not place this product on an unstable trolley, stand or table. The product may
fall, causing serious damage to the product or to persons!
Do not cover or block ventilation slots or openings.
This product should not be placed near a source of heat such as a stove, radiator,
or another heat producing amplifier.
Use only the supplied power adaptor which is compatible with the mains voltage
supply in your area.
The power supply adaptor should always be handled carefully and should be
replaced if damaged in any way.
Never break off the earth (ground) pin on the power supply adaptor.
The power supply adaptor should be unplugged when the unit is to be unused for
long periods of time.
Before the unit is switched on, the loudspeaker should be connected as described
in the handbook using the lead recommended by the manufacturer.
Always replace damaged fuses with the correct rating and type.
Never disconnect the protective mains earth connection.
High loudspeaker levels can cause permanent hearing damage. You should
therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear
hearing protection if continuously exposed to high levels.
If the product does not operate normally when the operating instructions are
followed, then refer the product to a qualified service engineer.
Only
suitable
for
safe
use
under
non-tropical
climate
conditions.
Maximum ambient temperature for operation: 35°C
Always make sure that the power adaptor is connected to a socket/outlet with an
earthed connection.
Mains Voltage: 100-240V~ 50/60Hz.
This amplifier is only designed and evaluated for safety at a maximum
altitude of 2000m.

Publicidad

loading