Maintenance And Cleaning - Rointe ZOCCA AQUA TZOAN50B078 Manual De Instalacion Y Uso

The product must not be placed in front of or directly below a fixed socket. The lower part
must be at least 15 cm above the floor.
An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the mounting template on the wall, making small marks at the places where the
holes are to be drilled.
3. Remove the mounting template and drill holes in the wall.
4. Insert the plugs into the holes made.
5. Screw the four metal anchoring pieces to the wall with the Ø 6.3 x 50 mm screws.
6. Screw the four fastening cylinders to the product as shown in Figure 1.
7. Insert the product plus cylinder assembly from point 6 into the metal wall anchoring
parts and fasten with the Ø 2.9 x 9.5 mm grub screw.
Nº. ITEM
1 Plug 10 mm
2 Metal Anchor Piece
3 Screw Ø 2,9 x 9,5 mm
4 Screw Ø 6,3 x 50 mm
5 Fixing Cylinders
6 Product

4. MAINTENANCE AND CLEANING

The product does not require any maintenance. We recommend cleaning the product (back,
bottom of the product, etc.). Do not use abrasive substances on the product, clean it with
a damp cloth and neutral pH soap and the screen with a dry cloth. Before carrying out any
cleaning operation, make sure that the product is switched off and at room temperature.
ZOCCA AQUA HYDRAULIC TOWEL RAIL
6
5
3
2
1
4
5
EN
9