Operation
OPERATION
Remote control
The enclosed connecting cable with the jack plug (cable for remote operation) contains a
remote control with three buttons and a microphone.
Buttons on the remote control
1. Increase volume (volume-up button)
2. Multifunction button (middle button)
3. Decrease volume (volume-down button)
Compatibility with playback devices
On compatible smartphones and tablets, you can use this remote control to control calls,
media playback and volume.
Please note that not every playback device supports all remote control functions.
This requires the pin assignment on the headphone jack to correspond to the CTIA
standard.
Only in this case are the functions described below possible.
The symmetrical Pentaconn cable can only be used with compatible playback devices.
► Please contact the relevant manufacturer for further details.
► Refer to the operating instructions of the device to which the product is to be
connected.
Playing media
To start / pause playback:
► Briefly press the middle button ( ) to start or stop the media
playback.
Depending on the playback device and the operating system and/or firmware version,
there may be further media playback functions that can be controlled by the middle
button.
Please contact the relevant manufacturer for further details.
15/18