Publicidad
Idiomas disponibles
Idiomas disponibles
Please take care when you insert the batteries, for the improper insertion may damage the
device.
Please replace two new batteries of the same kind at the same time.
4.3 Probe installation
Inserting the SpO2 probe of the pulse oximeter in the upper jack(see Figure 4). (The probe is limited to
be produced by our company; never replace it with the similar one by other manufacturers).
Figure 4.Probe Installation
When inserting the probe, make the protruding part of the probe plug correspond to the
groove of the probe socket. Pull out the probe directly and don't rotate the probe.
4.4 USB port
It is used to connect a personal computer to export the trend data or charge the lithium battery via a
data line(see Figure 5).
4.5. Structure and accessories
A. A.
Structure: main unit, probe,USB cable, Bluetooth adapter (optional).
B. Accessories: one adult-oximeter probe, two AA size batteries (optional), one USB cable, one CD disk
(including PC software, optional), one User Manual, Bluetooth adapter (optional).
Please check the device and accessories according to the list to avoid that the device can not work
normally.
C. Software description
Software name: CMS60D embedded software
Software specification: no
Release version: V2.0
Naming rule for version: V <Major enhancive software upgrade>.<Minor enhancive software up-
grade>.<Improvement software upgrade>
Involved algorithm: name: plethysmography; type: mature arithmetic
Purpose: be used to measure SpO2, pulse rate, etc.
Clinical function: calculate SpO2 and pulse rate values by collecting and processing the testee' s
pulse signal.
5 OPERATING GUIDE
5.1 Application method
A. Put the finger into the probe. Refer to Figure 6.
ENGLISH
Figure 5.USB Port
24
Publicidad
