universalblue UVP1200-20 Manual De Instrucciones página 25

 Mode setting, by pressing the 'MODE' button on the supplied
remote control:
o NORMAL mode: the fan will work normally.
o NATURAL mode: The fan will automatically change
o
As you can see at LCD screen, different lights (pilot lights) will turn
on when you select mode, swing and time.
To know the time you have programmed, please pay attention to the
LCD screen, you will see that when you press the "TIMER" button
once, it will activate 30 minutes time, and therefore the pilot light of
the screen that indicates this time will lights up. If you press the
"TIMER" button again, the pilot light that indicates 1 hour will lights
up. And if you press the "TIMER" button again, the pilot light that
indicates 1 hour will remain lighted up and the pilot light that
indicates 30min will also light up, in this case the fan is
speed, going from mild wind gusts to air gusts with
greater speed.
SLEEP mode: The fan is simulating a softer wind
mode by cycling one speed higher.
25