Publicidad
Idiomas disponibles
Idiomas disponibles
EN
14
SAFETY INSTRUCTIONS
•
Remove the packaging and make sure that no parts have been damaged
during transport. If any parts are damaged, contact customer service
immediately.
•
Children could injure themselves on the packaging materials and old devices.
Therefore, dispose of the packaging material immediately.
•
Children from the age of 8 years and mentally, sensory and physically
impaired persons may only use the device if they have been informed in detail
about the functions and safety precautions by a supervisor responsible for
them beforehand and understand the associated risks.
•
Check the voltage on the product label before use. Ensure that you only
connect the device to sockets with the appropriate voltage.
•
Only use the device for its intended purpose as described in the operating
instructions.
•
Follow the instructions carefully when assembling. An incorrect procedure can
lead to irreparable damage to the unit.
•
Switch off the device and remove the plug from the socket before cleaning the
device or when you are no longer using it.
•
If the device is not working properly, switch it off immediately and contact a
specialist company in your area.
•
If the power cord is damaged, it must be replaced by the manufacturer, an
authorised specialist company or a similarly qualified person.
•
Do not connect the unit to multiple sockets.
•
Do not use an extension cable.
•
Do not connect the device to timers or remote-controlled sockets.
•
Do not use or store the device near heat sources such as heaters.
•
Never immerse the device or the plug in water or other liquids. If water leaks
on it, unplug the appliance immediately and have it checked by a specialist
company.
•
When you use the appliance for the first time, remove all film and packaging
material.
•
Do not pull the plug out of the socket by the cable; instead, hold it securely
with your hand while unplugging it.
•
Before inserting the plug into the socket, make sure that the device is
switched off.
•
Do not stretch out the mains cable.
•
Make sure that all air inlets and outlets are free and not covered so that the
unit does not overheat.
•
Make sure that the power cord does not come into contact with sharp edges
or surfaces.
Publicidad
