Remapping The Steering Wheel Control Buttons - Metra 95-7298B Instrucciones De Instalación

Remapping the steering wheel control buttons

Once the ASWC-1 has been programmed, the button assignment for the steering wheel controls
may be reassigned if so desired. For example, if the "Seek-Up" button is preferred to be the
"Mute" button instead. Follow the steps below to remap the steering wheel control buttons.
1. Ensure the Axxess interface is visible so you can see the L.E.D. flashes to confirm
button recognition.
Tip: Turning the radio off is recommended.
2. Within the first twenty seconds of turning the ignition on, press and hold the "Volume-Up"
button on the steering wheel until the L.E.D. goes solid.
3. Release the "Volume-Up" button, the L.E.D. will then go out; The "Volume-Up" button has
now been programmed.
4. Follow the list in the Button Function Legend to reference the order in which the steering
wheel control buttons need to be programmed.
Note: If the next function on the list is not on the steering wheel, press the "Volume-Up"
button for (1) second until the L.E.D. comes on to skip that function, and then release the
"Volume-Up" button. This will tell the Axxess interface that this function is not available,
and it will move on to the next function.
5. To complete the remapping process, press and hold the "Volume-Up" button until the L.E.D.
in the Axxess interface goes out.
Continued on the next page
14
ASWC-1 STEERING WHEEL CONTROL SETTINGS
Button Function Legend
Function # Function
1 Volume-Up
2 Volume-Down
3 Seek-Up/Next
4 Seek-Down/Prev
5 Source/Mode
6 Mute
7 Preset-Up
8 Preset-Down
9 Power
* Not applicable in this application
Note: Some radios may not have these commands. Please refer to the manual provided
with the radio, or contact the radio manufacturer for specific commands recognized by
that particular radio.
(CONT.)
Function # Function
10 Band
11 Play/Enter
12 PTT (Push to Talk)
13 On-Hook
14 Off-Hook
15 Fan-Up *
16 Fan-Down *
17 Temp-Up *
18 Temp-Down *
|
386.257.1187 MetraOnline.com