Descargar Imprimir esta página

EIBENSTOCK EHR 15.2 SB Instrucciones De Servicio página 15

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Noise Emission
The indication of noise emission is measured according EN 62841-2-10. The
level of acoustic pressure on work site could exceed 85 dB (A); in this case
protection means must be used.
Wear ear protectors!
The typical hand-arm vibration is below 2.5 m/s².
Measured values determined according to EN 62841-2-10.
Vibration emission value
Uncertainty
The declared vibration emission level represents the main applications of the
tool. However, if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period
An estimation of the level of exposure to vibration should also take into
account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over
the total working period. Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects. (to be documented by invoice or delivery note). Damage due to
natural wear, overstressing or improper handling are excluded from this
warranty. Damages due to material defects or production faults shall be
eliminated free of charge by either repair or replacement.
Complaints will be accepted only if the tool was returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Only for EU countries
Do not dispose of electric tools together with household waste
material!
In observance of the European Directive 2012/19/EC on waste
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached
the end of their life must be collected separately and returned
to an environmentally compatible recycling facility.
a
K
Warranty
1,6 m/s
2
h
0,1 m/s
2
14

Publicidad

loading