Basic operation
In order to protect the speakers, follow the steps below when turning
on and off the system to which this unit is connected.
Turning the power on
1
Turn the audio source device on.
2
Turn the preamp power on and minimize its
volume.
3
Press the POWER button to turn this unit on.
After turning the unit on, the power indicator will blink and no
sound will be output for a few seconds. Wait until the power
indicator stops blinking and stays lit before adjusting the volume
and conducting other operations.
Turning the power off
1
If a source device is playing, stop playback.
2
Minimize the preamplifier volume.
3
Turn this unit off.
4
Turn the preamplifier off.
5
Turn the source device off.
15