Maintenance - Esoteric S-05 Manual Del Usuario

Note about pinpoint feet
High-precision metal pinpoint feet are attached to the bottom plate
of this unit.
The pinpoint feet and their stands are loose, but when the unit is
placed in position, it is supported by these pinpoint feet, which effec-
tively disperse vibrations.
Chassis
Foot-stand (metal)
Pinpoint foot (metal)
o This unit is very heavy, so take care to avoid injury during
installation.
o Apply the included felt pads to the bottoms of the foot-stands to
avoid scratching the surface where the unit is placed.
After placement

Maintenance

Use a soft dry cloth to wipe the surface of the unit clean.
For stubborn smudges, use a damp cloth that has been thoroughly
wrung out to remove excess moisture.
o Never spray liquid directly on this unit.
o Do not wipe with chemical cleaning cloths, thinner or other
chemical agents. Doing so could damage the surface.
o Avoid allowing rubber or plastic materials to touch the unit for
long periods of time because they could damage the cabinet.
V
For safety, disconnect the power plug from the
outlet before cleaning.
7