Descargar Imprimir esta página

SOLAC AS3104 Instrucciones De Uso página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
CLEANING
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive prod-
ucts, for cleaning the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
Empty the dust box when it is full (observation
facilitated by transparent windows), or when
vacuuming power is notably reduced.
Disconnect the hose from the vacuum clean-
ers air intake.
Disconnect the dust box from the appliance
(Fig.3).
Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle. (Fig.4).
Close the lid of the dust box.
Check the condition of the motor filter.
Connect the hose to the vacuum cleaners air
intake.
CHANGING THE FILTERS:
Motor filter, it is advisable to be changed at
least once a year or every 50 hours of the ap-
pliance's use.
Air outlet HEPA filter (high efficiency air filter
that efficiently retains spores, ash, sawdust,
pollen...), it is advisable to change it a least
once a year or after every 50 hours of use.
TO REMOVE THE FILTERS:
MOTOR FILTER:
Disconnect the dust box from the appliance
(Fig.3).
Remove the filter from its housing (Fig.5).
OUTLET FILTER:
Open the air outlet grate. To access the filter
(Fig.6).
Remove the filter from its housing.
To reassemble the filter, proceed with the
above instructions, in reverse order.
SUPPLIES
Supplies can be acquired from distributors
and authorised establishments (such as filters,
etc...) for your appliance model.
Always use original supplies, designed specifi-
cally for your appliance model.
These supplies are available in specialist
shops.
EN

Publicidad

loading