Installing The Appliance; Ventilation Requirements - AEG SWD81800L1 Manual De Instrucciones

Climate Ambient temperature
class
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature
range. If you have any
doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Service Centre
7.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.

7.3 Ventilation requirements

The airflow behind the appliance must
be sufficient.
min.
5 cm
200 cm

7.4 Installing the appliance

CAUTION!
Make sure that the mains
cable can move freely.
1. Apply the adhesive sealing strip to
the appliance as shown in figure.
2. Install the appliance in the niche.
ENGLISH 13
2
min.
200 cm 2