Publicidad
Idiomas disponibles
Idiomas disponibles
EN
8.2
Dangerous substances
CAUTION
Used or leaked fluids, and any other products consumed during the activities,
must be collected and disposed of in an environmentally responsible way.
8.3
Maintenance materials
/i
Application
Steel parts
Hydraulic couplers
Contact the Holmatro dealer for information on spare parts.
8.4
Maintenance schedule
This schedule is an average. Depending on the intensity of use of your equipment, Holmatro can
provide a specific maintenance schedule for you.
/i
Object
General
Hydraulic couplers
Hydraulic hoses
8.5
Maintenance activities
8.5.1
General
•
Check the operation of the unit.
•
Check the unit for damage and leaks. If the unit does not work properly and/or leaks, have it
repaired by a Holmatro Certified Technician.
8.5.2
Hydraulic couplers
•
Check the couplers for damage. Have a Holmatro Certified Technician replace damaged couplers.
•
Clean the coupler with luke warm water and a mild soap solution.
•
Dry the couplers.
•
Lubricate the end (1) of the coupler with hydraulic oil or inject WD-40.
•
Lubricate the locking ring by injecting WD-40 into the space (2) between the back section and the
locking ring.
30
Type of maintenance material
WD-40 preservative oil
Tectyl ML from Valvoline (long term preservation)
WD-40 preservative oil
Action
Check
Check, clean, lubricate
Check, clean
916.400.194_003
Time interval
x
x
x
x
Amount
As required
As required
As required
x
x
x
DR200(ST)
Publicidad
