Danger Of Burns Due To Hot Surfaces; Improper Handling - Kipp & Zonen SMP12 Instrucciones De Servicio

2 | Safety
4 Use suitable safety equipment.
4 Inspect the safety equipment before use.
4 Secure the person installing the product and the device used against falling down.

2.5 Danger of burns due to hot surfaces

The metal parts of the housing may get very hot when subject to a high ambient temperature (> 60 °C). If
someone touches the housing, these metal parts may cause burns.
4 Wear protective gloves during installation and maintenance.

2.6 Improper handling

If the product is not installed, used and maintained properly, there is a risk of injury. The manufacturer does
not accept any liability for personal injury or material damage resulting from incorrect handling.
4 Do not change or convert the product in any way.
4 Do not perform any repairs yourself.
4 Get OTT HydroMet to examine and repair any defects.
4 Make sure that the product is correctly disposed of. Do NOT dispose of it in household waste.
10 SMP12 Smart Pyranometer | EN