Introduction; Information On This Manual; Safety; General Safety Instructions - Rational iCombi Pro 20-1/1 Manual De Instalación Original

en
1

Introduction

1.1 Information on this manual

This document is a preliminary version of
the installation manual. Please note the rel-
evant version and date.
This manual describes the assembly of the
mobile base frame for the free-standing
units:
LM1: iCombi Pro (iCP) 20-1/1 and
n
20-2/1
LM2: iCombi Classic (iCC) 20-1/1 and
n
20-2/1
This manual is to be used in addition to the
installation manual for iCombi Pro /
iCombi Classic. Read the manual before
assembly. The manual is there to ensure
that you use the units safely and install
them properly.
The illustrations in this manual are ex-
amples only and may differ from the as-
sembly kit.
All information from the installation
manual for iCombi Pro / iCombi Classic
apply accordingly.
2

Safety

2.1 General safety instructions

This unit is designed in such a way that it
presents no danger if installed according to
instructions. This manual describes how to
install the unit correctly.
Adhere to the relevant local regula-
n
tions and standards in your country.
Use carrying aids such as carrying
n
straps during transportation.
Secure the unit against tipping during
n
transport, after setting up at the in-
stallation location.
8 / 56
n
n
n
n
n
n
n
n

2.2 Intended use

The mobile base frame is exclusively inten-
ded for use in large and commercial kit-
chens.
The mobile base frame enables the mobile
use of floor-mounted units.
3
This assembly kit is used to install the mo-
bile base frame for floor-mounted units.
The mobile base frame is only available for
floor-mounted units.
The mobile base frame enables the mobile
use of floor-mounted units. Subsequent
installation is possible.
80.51.826_iCombi Pro-iCombi Classic_fGR SG _IM_V01_EU-west
Wear appropriate protective clothing,
such as protective gloves and safety
gloves, when transporting and in-
stalling the unit.
The appliance must be installed in a
frost-resistant, non-windy and protec-
ted environment.
Do not expose the unit to weather
conditions such as rain.
Only connect the unit in accordance
with the installation manual and the in-
formation on the type plate.
Switch the unit off before disconnect-
ing the mains power or connecting to
the mains.
After use, only transport the unit at
ambient temperatures above 0°C
[32°F].
Only store the unit at ambient temper-
atures above 0°C [32°F].
Do not operate the unit without an air
filter.

Product description

1 | Introduction