TFK mono 2 Instrucciones De Uso página 12

INSTRUCTIONS FOR USE AND INSTALLATION
Fig. 1.:
To use the tfk mono2, fold up the push bar (1). This will unfold the trolley.
Make sure that the pins (2) audibly engage in the locking mechanism.
To fold the pushchair, pull the two light grey catches (2) upwards; they
remain open automatically. Then you can fold the push bar (1)
forwards. The frame folds up automatically. To keep it folded in during
transport, hook the transport lock (3) into the catch loop.
Fig. 2.:
To mount the rear wheels, insert the axle into the frame so that the
brake is also in the holder (4). Hook the brake hook (5) into the M-brake.
If you want to remove the wheels, loosen the brake hooks (5) and press
the kangaroo button (6) in the middle of the wheel. Now you can
remove the wheels. You have the option of adjusting the braking force
by screwing the adjustment screw of the brake hooks (5) in or out and
securing it in the selected position with the counter screw.
Fig. 3:
Insert the front wheel into the opening provided (7) until it audibly
engages. By turning the adjustment knob (8) you can choose whether
the front wheel is locked in the straight-ahead position or can turn
freely. If you press the grey button (9), you can remove the wheel
downwards.
Fig. 4.:
The height of the push bar can be adjusted by pressing the two
adjustment joints (10). When you are on the move with the tfk mono2,
please attach the supplied catch loop (11) to the push bar. Then put
the side with the elastic band over your wrist. TFK recommends that you
always use the catch strap to prevent the pushchair from rolling away
unintentionally. When you are not using it, you can keep it handy in a
pocket in the basket.
Fig. 5.:
The handbrake (12) on the push bar is both a running brake and a
parking brake. To activate the parking brake, you must pull the brake
lever and flip the grey parking lever (13) so that the brake lever remains