Abus SmartX Manual De Instrucciones página 11

3. Automatic mode:
The remote control transmits when
2.
motion is detected (transmits for approx.
8 seconds after last movement).
The remote control also transmits after
the button is pressed (transmits for
1.
approx. 5 seconds). The LED will flash
green twice to confirm.
4. Low Battery:
If the battery power is low, the remote
control will switch to manual mode to
conserve power.
LED signalling when button is pressed:
Do not touch
flashes red once. Replace the 3V CR2032
sensitive com-
battery immediately with a new one
ponents!
(→ see Battery replacement).
Battery replacement
Lift the lid, do
not twist!
Attention
20 21