Main Screen; Navigation; Adjusting The Temperature - Airzone DZK-4 Guia Del Usuario

Main screen

Access the main screen by pressing "Airzone" from the screensaver:
User modes
EN
Operation mode
Zone
Room temperature
Relative humidity
Settings menu
Local ventilation
Main screen/
confirm

Navigation

To navigate through Wireless Thermostat, follow the instructions you will see on the screen. Press the side
buttons on the control bars to execute the instructions.

Adjusting the temperature

On/Off. Press to turn the zone On/Off.
72° Temperature Control.The temperature displayed on the screen is the current set-point temperature.
Adjust the set-point temperature on the Think Thermostat following the next instructions:
Select the set-point temperature using the control bar (by pressing or by sliding) to manually adjust by
increments of 1 ºF (0.5 ºC). Press once to adjust the set-point temperature by increments of 0.5 ºC (1 ºF).
Slide to adjust the set-point temperature in larger steps.
The permitted temperature range is:
•
Heating Mode: 59 - 84 °F (15 ºC – 29 ºC)
•
Cooling Mode: 64 - 86 °F (18 ºC – 30 ºC)
Note: Press the Airzone button to switch between heat and cool set-point temperatures.
There is a minimum difference allowed between heating and cooling set-point temperatures. The system
will prevent setting a temperature within the protection range.
12
User's manual
Airflow Control
Control bar
Set-point
temperature
Zone
demand
Timer
On/Off