Burning Wood - Dovre Sense Serie Instrucciones De Instalacion Y Uso

4. Close the appliance door and open the primary
and secondary air inlets; see the following figure.
5. Allow the fire develop into a good blaze until there
is glowing bed of charcoal. You can then add fuel
and adjust the appliance, see the chapter "Stoking
with wood".
A B
Subject to change because of technical improvements
All manuals and user guides at all-guides.com
C:
o o o Primary air open (when lighting the stove)
o o Secondary air open (glass wash)
o
B:
o o Secondary air open (glass wash)
o
A:
o

Burning wood

After you have followed the instructions for lighting:
1. Slowly open the door of the appliance.
2. Spread the charcoal evenly across the bottom of
3. Stack a few logs on the charcoal.
Open stacking
C
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
09-20021-018
Air for post-combustion open
Air for post-combustion open
Air for post-combustion open
(never close entirely for proper combustion)
the stove base.
17