WESTEK TM09DHB Manual De Instrucciones

Indoor
Daily Timer
Instruction Manual & Warranty
This is a 24 hour mechanical timer with 30 minutes interval settings
and 24 On/Off cycles per day. Ideal for home security and energy saving
applications.
1. Point arrow on face of dial to current time of day.
2. Locate pegs on the outer edge of timer's dial. Be sure all pegs are
pushed in before programming. Select a time period you want the
appliance turned on, then push out ALL the pegs that fall on or within
that period. For example, to have the timer turn an appliance on at
11PM and off at 3AM, push out pegs representing 11PM and 3AM,
and ALL pegs in between.
3. Set switch to TIMER ON position.
4. Plug appliance into outlets of timer.
5. Plug timer into an electrical outlet convenient to the appliance to be
controlled. The appliance will now turn on and off at the times you
have set.
Note
To override the timer and use your appliance normally, set the switch
to the OUTLET ON position. This will deactivate the timer's control of
the appliance, but the timer's dial will still show the current time of day.
To reactivate the timer's control of the appliance, set the timer's switch
to TIMER ON position. In case of power failure, reset the time of day
as explained in step 1.
Warning
- Do not exceed electrical rating
- Indoor use only
- Keep away from children
- Plug directly into protected electrical outlet
- Unplug timer before cleaning
- Fully insert plug
- Do not use in wet locations
- Do not use damaged cord set
Figure 1 – Shows timer set to turn appliance ON at 11PM
and OFF at 3AM. Notice ALL pegs between 11PM and 3AM
have been pushed out. Current time is 9PM.
Ratings
125V~, 60Hz
15 Amps, 1875 Watts Resistive
10 Amps, 1250 Watts Tungsten
Limited One Year Warranty
AmerTac warrants this product to be free from defects in material and workmanship
™
for a period of one year from the date of purchase. AmerTac's obligations are limited
to repairing or replacing any defective unit and are effective only if such units are
returned within one year of the purchase date to AmerTac, 250 Boulder Drive,
Breinigsville, PA 18031. Warranty void if damage is due to misuse or improper
installation. In no circumstance will AmerTac be liable for consequential or
incidental damages relating in any way to this product.
Questions?, ¿Preguntas? 201.661.9944
©2010 AmerTac™
250 Boulder Drive
Breinigsville, PA 18031
www.amertac.com
Made in China
Fabriqué en Chine/Hecho en China
with 2 grounded outlets
TM09DHB
I09-0049-A