Cleaning And Maintenance - Eureka MIGNON LIBRA Instrucciones De Manejo

EN
ATTENTION
If the weighing system, during the grinding phase, does not detect a change in
grams on the filter-holder, it will stop to prevent the motor from overheating.
6

CLEANING AND MAINTENANCE

ATTENTION
Do not leave the filter-holder inserted on the filter-holder fork.
ATTENTION
Disconnect the appliance from the power supply before carrying out any cleaning
and maintenance operations. Do not pull the power cord or the appliance itself to
disconnect the plug from the power supply socket.
ATTENTION
Maintenance and cleaning operations must be carried out by specialized
personnel authorized by the manufacturer.
ATTENTION
Do not carry out makeshift or precarious repairs, much less use non-original
spare parts.
6.1 CLEANING
Cleaning is a critical aspect for the correct operation of the coffee grinder. A neglected
coffee grinder can have a negative impact on coffee brewing and on the accuracy of
dosing and grinding. Before cleaning, make sure the appliance is unplugged.
6.2 CLEANING THE HOPPER
Wash the inside of the hopper with water and mild soap, removing the oily layer left by
the coffee beans. Rinse it and dry it thoroughly. Repeat the process for the plastic lid.
Do not wash in the dishwasher.
Cleaning is recommended at least once a week.
6.3 CLEANING THE GRINDING SYSTEM
After removing the lid, open the upper grinder holder. Then clean the grinders and other
internal parts with a brush or a dry cloth. If necessary, use a vacuum cleaner or a jet
of compressed air. After putting back the upper grinder holder and the lid, insert the
hopper.
For complete sanitation, use commercially available detergent tablets for coffee
29