Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
WARNING: RISK OF PERSONAL INJURY DUE TO
CHEMICAL EXPOSURE. Use the appropriate Personal
Protective Equipment (PPE) as recommended by the
chemical manufacturer and/or refer to the chemical
Safety Data Sheet (SDS) of the chemical being used. This
includes at least goggles, gloves, and protective clothing.
WARNING: To reduce the risk of serious personal injury,
turn unit OFF and remove the battery pack before
making any adjustm-ents or removing / installing
attachments or accessories. An accidental start-up can
cause injury.
NOTICE: The battery pack is not fully charged out of
the carton. Before using the battery pack and charger,
read the safety instructions below and then follow the
charging procedures outlined.
Filling the Sprayer
DANGER: RISK OF DEATH, SEVERE PERSONAL INJURY,
AND/OR PROPERTY DAMAGE FROM IMPROPER
CHEMICAL USE OR MIXTURE.
• Never use flammable or combustible chemicals in
this sprayer. Spraying flammable or combustible
chemicals can create combustible fumes that could
be ignited, causing an explosion.
• Use only chemicals indicated for spraying
applications. Some chemicals may create a toxic or
other hazardous atmosphere when sprayed.
• Always refer to chemical manufacturer's instructions
and/or the chemical Safety Data Sheet (SDS) for
proper mixture and safe application.
WARNING: Inspect the sprayer, hose, shut-off, wand,
and all connections for damage before each use.
A damaged or loose hose connection can result in
unintended exposure to the pressurized chemicals,
resulting in serious injury or property damage.
Before you Begin
Test the sprayer with plain water before use with
chemicals, prior to initial use, and after prolonged
storage.
Place the sprayer on a stable surface and ensure it is
OFF.
Remove the battery from the battery compartment.
See Removing the Battery.
Filling Procedure
1. Unscrew the cap (1) and place it on a clean
surface where it will not collect dirt, dust, grass
clippings, or other debris.
2. Remove the filter basket (2) and remove any
debris. Place the filter basket (2) on a clean
surface where it will not collect dirt, dust, grass
clippings, or other debris.
3. Inspect the tank interior for debris, and clean as
needed.
4. Check to make sure the in-tank filter (3) is in
place, the mesh is intact, and it is not clogged
with debris. See In-Tank Filter Maintenance.
5. Ensure the shut-off assembly is connected to the
tank. Otherwise, liquid will pour out of the open
connection.
6. Follow the chemical manufacturer's instructions
for preparing the chemical. Fill the sprayer by
pouring liquid into the top opening and through
the filter basket, to the desired volume, according
to the volume graduation markings on the side
of the tank.
7. Clean up any spilled, splashed, or overflowed
liquid on the sprayer.
8. Insert the battery according to the instructions in
Installing the Battery.
Fig. 9
ENGLISH
1
2
3
13
Publicidad
