Publicidad
Assembly Instructions
Install the Feet
1
Using a 5mm Driver Bit, secure feet to legs
using the eight M8 x 30 Machine Screws.
Install the Wing Brackets
1
Flip the table base right side up. Install the wing brackets one side at a time.
2
Remove the lower front screw and set aside.
3
Position the corresponding Wing Bracket
(stamped L or R) into place.
4
Install the screw removed in step 2.
5
Using a 4 mm Hex Driver Bit, install the two
M6 × 7mm Flat Head Screws from the
top into flange on the Leg.
6
Repeat steps for other Wing Bracket.
2
4
3
4
5
Publicidad
