iM3 ART-SP6 Instrucciones De Uso página 23

While you are in scaling mode, the border of the Scaler icon will be bolder, and the numbers
below will display your current power level.
When you are in polishing mode, the border of the Polisher icon will be bolder, and the
numbers below will display your current micro-motor speed (x100 R.P.M.).
3. Water control knob
The water control knob allows you to control the amount of water that flows through the
hand piece. If turned clockwise, the amount of water will decrease. If turned counter-
clockwise, the amount of water will increase. Please note that water is necessary to cool
the tip and prevent overheating so it is necessary to ensure that an adequate amount of
water flows through the hand piece while operating the device. The larger the water
stream, the lower the temperature, and vice versa.
4. Micro-motor Socket Seat
The micro-motor connects to the main unit through this socket.
- 21 -