Reference; Troubleshooting; Compliance - Mio Moov M300 Serie Manual Del Usuario

Reference

Troubleshooting

Note: If you encounter a problem you cannot solve, contact an authorised service center for assistance.
Problems
Power does not turn on when using
battery power.
Screen responds slowly.
Screen freezes.
Screen is hard to read.
Cannot establish a connection with a
computer.

Compliance

Note: Moov M300-Series is assigned a model number of N254 and Moov M400-Series is assigned a model name of
N255.
Products with the CE marking comply with Radio & Telecommunication Terminal Equipment Directive
(R&TTE) (1999/5/EC), the Electromagnetic Compatibility Directive (2004/108/EC) and the Low Voltage
Directive (2006/95/EC) - issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Standards:
EN 301 489-1: Electronic compatibility and Radio spectrum Matters (ERM), ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
Solutions
The remaining battery power may be too low to run your Mio. Charge the
battery.
Make sure that your Mio is not running out of battery power. If the
problem still persists, reset your Mio.
Reset your Mio. (See "Shutdown and hardware reset" for information.)
Make sure that the backlight of the display is set to a high-enough
brightness.
Make sure that your Mio and your computer are both turned on before
trying to establish a connection.
Make sure that the cable is securely plugged into the USB port on your
computer and on the Mio. Connect the USB cable directly to your
computer—do not run the cable through a USB hub.
Reset your Mio before connecting the cable. Always disconnect your Mio
before you restart your computer.
17