Safety Measures - Beninca SAM Serie Manual Del Usuario

BEN

SAFETY MEASURES

• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the failure
but contact the specialised personnel.
MANUAL EMERGENCY OPERATION
In the event of a power cut or fault, to manually activate the gate
do as follows:
- Lift the sliding hatch L
- Insert the customised key C, rotate it ANTI-CLOCKWISE by ap-
prox. 90°.
- Pull the lever M to release the automation. The lever remains
spontaneously in the release position
- Manually push the gate, to open and close it.
- To re-establish normal operation, bring lever M to the initial po-
sition and keep it in the position by lightly pressing. Rotate key
C CLOCKWISE by approx. 90° to lock the lever M in the initial
position.
- Activate the gate manually until it engages.
- Close the sliding hatch L.
MAINTENANCE
• Every month check the good operation of the emergency manual
release.
• It is mandatory not to carry out extraordinary maintenance or
repairs as accidents may be caused. These operations must be
carried out by qualified personnel only.
• Periodically check the efficiency of the safety devices and
other parts of the system that could generate hazards due
to wear and tear.
L
C
M
• The operator is maintenance free but it is necessary to check
periodically if the safety devices and the other components of
the automation system work properly. Wear and tear of some
components could cause dangers.
• Keep the maintenance record that must be handed to you by
the installer, and comply with the maintenance schedule.
• Unplug the system from the power source when servicing or
cleaning the parts.
• Regularly check that all parts of the automation system are
firmly secured and check for signs of wear or damage to ca-
bles, springs and fastening screws. Do not use the automation
system if the same requires repairs or maintenance.
WASTE DISPOSAL
As indicated by the symbol shown, it is forbidden
to dispose this product as normal urban waste as
some parts might be harmful for environment and
human health, if they are disposed of incorrectly.
Therefore, the device should be disposed in special
collection platforms or given back to the reseller if
a new and similar device is purchased. An incorrect
disposal of the device will result in fines applied
to the user, as provided for by regulations in force.
USER'S HANDBOOK
C
85