MaxxGarden 21967 Manual De Usuario página 38

HEATER ASSEMBLY
Tools Required:
1 Screwdriver, 1 adjustable spanner
1. Unscrew the pre-assembled screws
(M3/16 ). Connect and fix the 4 lower
supports(4) to bottom plate (3) and
middle plate (1) using the unscrew
screws (17).
3. Unscrew (M3/16) 4pcs screws from the
bottom of the middle plate (1). Install a
AA battery (20) into the control box, then
fix the control box (2) underneath
the middle plate(1) using screws (17).
38
2. Unscrew the pre-assembled screws (M3/16 ).
Connect 4 upper supports (5) to the lower
supports (4) and secure using screws (17).
Fix the upper plate (6) to 4 upper supports (5)
using screws (17).
4. Carefully put the glass tube (8) up through
the centre hole in the upper plate (6), make
sure the rubber ring is attached on the lower
end of the glass tube (8). Move and sit the
glass tube(8) through the hole of the plate
cover (7) on the middle plate (1), check and
ensure that the glass tube (8) cover the
centre hole of the middle plate (1)