9. Screw the handle(18) onto the front panel (16), attached the handle connector tube (12) back
the front panel, screw them with 2pcs M4X8 bolts, hook the chain (19) to the hole in control box,
then Close panel to the middle plate, the panel is attracted by the magnets.
Tips: the chain can hold the panel while operating the control
OPERATION
Preparation:
You will need to purchase a LPG cylinder. You need a suitable size LPG cylinder that can be
installed to the compartment.
You have to use pressure regulator with an outlet pressure comply with the appliance category.
The flexible tube must be approved also.
Connect the hose to the hose connector in the control box.
Warning:
Always test the hose for leaks with soapy water at both of the ends.
e
Warning:
• Never use the heater while it is raining, if the glass tube is suddenly met with water it may break.
• Never splash any liquid to the glass tube when the heater is in operation
• The glass tube will be extremely hot when it is working, do not try to touch it
• Keep the children away from the heater.
• Always ensure the heater stands firmly; the glass tube may break if the heater was to fall
• Never use the heater if the glass tube is damaged.
40
COMPLETED