• Make sure the heater is always under surveillan-
ce and keep children and animals away from it.
• Do not place/use the heater on moving vehicles
or some where easy to be tripped over.
• When the heater is not used for a long time,
unplug the heater form its means. Pull the plug
straight out, never remove the plug by pulling
the cord.
• Keep the heater far from curtain or places whe-
re the air inlet van easily be blocked.
• The power coupler is waterproof when not in
use. In order to prevent possible electric shock
or leakage current, never use the heater with
wet hand or operate the heater when there is
water on the power cord.
• Do not dispose of electrical appliances as un-
sorted municipal waste, use separate collection
facilities. Contact your local government for
information regarding the collection systems
available. If electrical appliance are disposed of
in landfills or dumps, hazardous substances can
leak into the groundwater and get into the food
chain, damaging your health and well-being.
• This appliance is not intended for use by per-
sons (including children) with reduced physical,
sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for
their safety.
Warning! Do not use this heater in small
rooms when they are occupied by persons
not capable of leaving the room on their
own, unless constant supervision is
provided.
Warning! To reduce the risk of fire, keep
textiles, curtains, or any other flammable
material a minimum distance of 1 m from
the air outlet.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
WWW.VONROC.COM
Always check that the voltage of the
power supply corresponds to the voltage
on the rating plate label.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
2. MACHINE INFORMATION
Intended use
The electrical heater is intended for indoor,
non-commercial, household use for temporarily
heating residential rooms. Do not use the product
for any other purpose. The heater can be used in
enclosed rooms in a free standing position for room
heating. The heater may only be used completely
mounted and standing vertically on a stable surfa-
ce. It incorporates a thermostat and a self-resetting
thermal cut-out to control the heating element and
therefore the temperature.
TECHNICAL SPECIFICATIONS
Model No.
Power supply
Power rating
Settings
Temperature range
Timer
Heating capacity
Protection class
Length of cord
Weight
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-3.
1. Heater
2. LED control panel
3. Indicator light
4. Handle
5. Air outlet grille
6. Base
7. Temperature LCD-display
EN
EH515AC
220-240 V ~/ 50 Hz
2000 W
Fan / 1000 W / 2000 W
15 – 35
C
o
1 - 9 hour
20 m2
Class II
1.6 m
2 kg
5