EN
38
Shelves
• To avoid damaging the door seal, make sure the door is fully open before pulling
out the shelves to add or remove bottles.
• To facilitate access to the contents of the shelves, pull out the shelf about one third of
the way. The shelves are equipped with a stop to prevent the bottles from falling out.
• To remove or reposition the shelves, tilt the shelf as shown in the illustration and then
push or pull as needed.
Humidity control (optional)
The appliance is equipped with a system that allows to control the humidity. Fill the
plastic container (humidity box) ¾ full with water and attach it to the holders on the top
wine rack. Check the water level regularly and top up with water. Make sure that the
container sits firmly on the holders so that it cannot fall over and leak water.